Shower Shield Water Barrier Wound Cover

Manufacturer: Shower Shield
Brand: Shower Shield

Starting At: $8.09

SELECT BY PRODUCT DETAILS
Clear Options
SELECT BY ITEM NUMBER
Want a discount? Become a member by purchasing Silver Membership, Gold Membership or Business Membership, or log in if you are a member.

Description

Product Details:
Shower Shield water barrier consists of a polyurethane film with acrylic adhesive. Latex-free, it is safe for use on persons with latex allergies. It is clinically proven effective in keeping water away from the covered area while showering.

Shower Shield is sold in packages that contain an assortment of sizes: 4″ x 4″, 7″ x 7″, 9″ x 9″, and 10″ x 12″ pads. You should use the pad that most completely covers the dressing without allowing the adhesive to come in contact with the dressing. (Shower Shield should always be used over a dressing; it should never come in contact with the wound itself.)

Directions for Use

Application:

  1. Clean and dry area surrounding wound thoroughly.
  2. Make sure area to be covered has appropriate dressing. Shower Shield should not be allowed to come in direct contact with the wound.
  3. Clip any excess hair at the site. Shaving is not recommended. Always follow your physician’s advice.
  4. Open poly bag and select appropriate size for application. Choose a Shower Shield bandage that is large enough to adhere to SKIN ONLY (not to wound, device or primary dressing).
  5. Peel the wax paper frame from the water barrier, exposing the adhesive surface.
  6. Position water barrier over the site. Gently remove the wax paper frame, smoothing the dressing down as you pull the frame away, pressing edges down firmly to adhere to skin.
  7. Firmly smooth water barrier from the center toward the edges.
  8. Repeat pressure on all sides of adhesive as a final securing step.

Removal:

  1. Gently grasp the edge and slowly peel the water barrier from the skin in the direction of hair growth or grasp one edge of the water barrier and gently pull it straight out to stretch and release adhesion, being careful not to disturb the primary dressing or device.
  2. Discard after use. Shower Shield water barriers are single use only.

Cautions:

  • For external use only.
  • Non-sterile: Do not use if package is open or damaged.
  • Shower Shield is not designed to come in direct contact with wound itself. Make sure area to be covered is covered with appropriate sterile dressing before applying Shower Shield.
  • Do not place over nose and/or mouth.
  • Do not use over the eyes.
  • Do not allow children to handle Shower Shield without adult supervision. It could present a choking or suffocation hazard if misused. An adult should always supervise a child who has a Shower Shield on his or her body.
  • Single use only. Store at room temperature.
  • Contact your health-care provider immediately if you suspect that you have a medical problem or if condition persists or gets worse.
  • For additional information about product, please contact the manufacturer.
  • When properly applied, Shower Shield is impermeable to liquids from brief contact. Shower Shield is not designed for submersion.

Every medical condition is different, please contact your health care provider prior to use.

Additional information

Manufacturer

Shower Shield

Brand

Shower Shield

Size

, , ,

Amount

Pack of 7, Case of 98

Billing Supported

Reviews

There are no reviews yet.

Be the first to review “Shower Shield Water Barrier Wound Cover”

Your email address will not be published. Required fields are marked *